The Fractional CO2 Laser Machine is a kind of skin beauty machine. It is a kind of minimally invasive treatment in between invasive and noninvasive treatment.
The Fractional CO2 Laser Machine treatment means that using laser to perforate evenly on skin, thus forming three areas on the skin: thermal spalling, thermal coagulation and thermal effect. It will cause a series of biochemical reaction on skin, thus stimulating the skin to do self-repairing. Then you can get the effect of skin firming, skin rejuvenation and pigmentation removing. Because the fractional laser will only act on part of the skin and the newly punched holes will not overlap, so part of the normal skin will be retained to speed up recovery. The patients can live normally after 4-5 days. So this treatment method is quite safe and can be used on any part of your body.
The Fractional CO2 Laser Machine can be used for the following purposes:
1. Treatment of acne, acne scars, scars etc.;
2. Removing of eyelid wrinkle, crow's feet and some other lines and stretch marks around eyes;
3. Improving wrinkles of face and forehead, wrinkles of joints and stretch marks effectively;
4. Treatment of skin lesion with pigment such as lentigo and nevus zygomaticus;
5. Systematic skin peeling, skin firming and skin lifting;
6. Removal of stretch marks and other deep scars.
|Laser type||Coherent CO2 laser from America;|
|Working mode of laser device||continuous;|
|Output mode after control system||super pulse, single and dot matrix;|
|Working mode of dot matrix||intermittent load run continuously;|
|Beam spot mode||single mode;|
|Diameter of focal spot||100um-2000um, decided by zoom lens cone;|
|Output pattern||Triangle / Square / Rectangle / Hexagon / Circle / Straight line, and it can also be upgraded to DIY graphics;|
|Power of aiming beam||≤5mw;|
|Beam guiding system||7-articulated beam guiding arm;|
|Wavelength of aiming beam||650nm;|
|Amounts of focal spots||(square) 625 dots (maximum 25×25);|
|Rate of ablation||(dot matrix) 1%-100%;|
|Graphics area||0.1mm×0.1cm - 20mm×20mm;|
|Scanning mode||sequential, middle separated and out of order dot matrix scanning;|
|Pulse interval||1ms-100ms, stepping 1ms;|
|Working voltage||AC 220V±10%, 50Hz AC 110V±10%, 60Hz;|
1. Strong power
Comparing with the traditional laser, fractional laser is more powerful, thus it can penetrate directly into deep dermis. It can stimulate the damaged dermal tissue to do self repairing, then generating more collagen and rearranging them. And finally achieve the effect of rejuvenation.
2. No harm
It adopts fractional laser system. It can generate micropore with the diameter of 120-1200um and hole interval of 500um on your skin by using the ablation effect of laser. These micropores will close up in one day after treatment, and they are difficult to see with the naked eye. So there will rarely be exudate, bleeding and infection.
3. Custom therapeutic schedule
This machine can provide customized therapeutic schedule according to individual requirements. The diameter and depth of micropore can also be adjusted during treatment. Among all laser treatment, fractional laser is the only technique that can realize 5-100% adjustment of treatment range. Meanwhile, you can get remarkable treatment effect just after single treatment.
4. National safety certification
The fractional laser has the following features: having strong penetration power, being minimally invasive, ensuring that the micropores will be uniformly distributed to avoid the overlapping of the laser beam. So it is the kind of laser which is the most suitable for systematic facial treatment to make your skin smooth.
5. The skin can recover in 3-6 days
During treatment, the part of skin which has been penetrated directly by laser will form white spot matrix. The endo-cuticula around these spots will recover in 8 hours. Thus you can wash face and take a bath normally.
1. The Fractional CO2 Laser Machine adopts original RF tube laser device imported from Coherent, America. It has strong power, stable output and long service life.
2. There are three types of treatment heads which can be used on skin peeling, surgery and vagina firming respectively.
3. It adopts 7-articulated beam guiding arm imported from Korea which is flexible and consume no energy.
Q: Why there is no bleeding during fractional laser treatment?
A: The focal spot of fractional laser is quite small with the diameter of 50-80um and will generate micropores o your skin with the diameter of 50-120um. There will be a small area of thermal coagulation on the skin around the micropore. The temperature of this area is 65℃ which can improve blood coagulation so that there will be no bleeding.
Q: What is the difference between fractional laser and microneedling?
A: Microneedling is the application of using needle roller to produce micropore on skin. It can destroy the structure of skin directly to make inflammation and repair happen. The micropore produced by microneedling has large diameter, and there is no thermal action that is thermal coagulation and thermal effect. So there will not be collagen contraction and regeneration.
Q: What kind of facial wrinkles will get better treatment effects from fractional laser?
A: The fractional laser is more suitable to wrinkles of middle and mild degree, especially the tiny wrinkles that can't be removed by surgery and soft tissue augmentation.
Q: Why the penetrating depth of fractional laser is only 2mm?
A: Because the contact with UV light will cause elastic fiber denaturation within 2mm depth, so the depth of fractional laser is kept within 2mm to improve the skin problem caused by light aging.
Q: When can you get more obvious treatment effect from fractional laser, just then or after?
A: You can get more obvious lifting effect immediately after the treatment because of the collagen contraction caused by thermal effect. But the collagen will gradually regenerate after treatment, so you will find that your skin conditions are getting better and better, your skin texture is getting smoother, the wrinkles are disappearing.
Q: What may change after one course of fractional laser treatment?
A: You will get quite angular face. And the skin of your face will be firming, smooth and delicate, shiny and elastic. The tiny wrinkles will disappear, the deep wrinkles will become shorter and shallow.
Q: Will the skin be sensitive and get thinner?
A: The fractional laser acts on the skin through non-sequential scanning. The diameter of focal spots is only 50-80um, so it do little harm on epidermis. Meanwhile, the collagen fiber will regenerate and then increase the thickness of corium layer after the treatment. Thus, this treatment can only improve your skin conditions without making it thinner.